1 CLOCKIT LANC LOGGER ALL601 Description and instructions for use Rev. 1.01 Ambient Recording GmbH, Schleissheimer str
10 Instructions for use General desription KEYS There are 6 keys used to configure the ALL and to call up system data, ESCape ( also Log an
11 JOB/Menu bar in Blue The JOB bar is configured to look like tabs in a filing system. On the right the battery capacity (Symbol) and System data
12 Menu Bar When a menu is selected with ENTter then the Menu select bar appears The menu title moves to the left position and submenu details to co
13 MENU DESCRIPTION ON OFF Menu SWITCH ON Press ESCape for 3 seconds, display will light up and show AMBIENT CLOCKIT LANC LOGGER ALL601 Serial
14 TO SWITCH ON FROM STANDBY Press ESC for 3 seconds, wakeup window shows Press ESC to wake up Press ENT to reenter standby Note: to enter menu a
15 SYS system parameters RTC. The real time clock Time can be set from the TOD generator or edited Date can be set from the TOD generator or edi
16 Note: The filter is used to ascertain whether the recording device is in Record or just spooling or playing back. According to this information a l
17 LANC to TOD. Using a Sony Lanc port for Rec. Run. timecode source EXT LTC to TOD Using external Rec. Run. LTC as timecode source KEY TOD. Using
18 RED Logging filter and TC spot check can be set ( logging mode) INPUT TC FILTER See table TC SPOT CHECK 5, 7, 10 sec after REC begin Setting
19 CON TIMECODE CONVERSION Converts Timecode source to another TC out format, with or without offset MODE sets conversion path LANC to LTC/MIDI
2 USER MANUAL „LANC LOGGER” ALL601 The Lanc logger is a very small hand held timecode device for use in Film or TV. Its innovative timecode featur
20 FDL File download Use this job when ALL is connected to a computer to download log files. UPD Program update USB mass storage upload enab
3 Conversions LANC TC to MIDI TC (USB Port) and LTC (Lemo, Audio) LANC TC to LTC with or without OFFSET EXT LTC to MIDI TC (USB Po
4 Mic/Audio TC out to Camera IR Comms Mic/ Audio TC/ Mic in Lanc to Remote Lanc from Camera USB Cursor Keys Lemo: Aaton, Ambient TC Interface Display
5 Uses Audio track LTC recording To record the exact TOD (Userbits inserted from Logger) of the ALL to an audio track of the camera being used, thus
6 Uses LOGGING. The ALL makes logs of Rec.Run. Timecode from the LANC out of the camera gainst internal TOD. Ancilliary data such as cassette num
7 ESCape left, red In addition to an ESCcape function when navigating the menus, this key is used to switch the ALL on and off or with the ENTer key
8 DISPLAY The Display is a 2 colour ( yellow bar on top, rest blue) OLED with 128X64 pixels. OLED displays are small daylight readable, low power dev
9 Hardware Description • Internal power supply with standby power, from batteries (2xAAA) • 40 Mhz ARM 7 RISC processor • 6K non volatile Ferroma
Comments to this Manuals